

Here is MANUAL for Car video camera dual lens rear view monitor DVR 1080p H264 Car rear view camera video recorder,pls refer.
any question,please check whole smart electronics website or ask master of eSMART.net. Thanks.
Car rear view camera 805 product review.
Car rear view camera 805 user manual
Car rear view camera 805 installation / mount guide.
Car rear view camera 805 FAQ and upgrade manual
Structure diagram and briefly structure:
Mainboard KEY:
1. 2.7 inch display 8. camera 15.reset
2.power on/off 9.speaker
3.mode 10. Spring clip
4.menu 11.AV OUTPUT
5.up 12.USB jack
6.down 13.TF card slot
7.OK enter/start/pause 14.AV IN / DC
Accessories: car charger / manual /AVOUT wire / rear view lens / rear view wire /USB cable / rag
Assembly and operation
(一)Assembly
1.Insert the TF card into TF card slot(UN-included in this package).
2.Installed and Fixed the spring clip, ensure the rear view camera was fixed in the middle , and safe driving position.
3. Turn off the car engine, adjust the camera position, to obtain the best shooting range
4. Check the machine is installed correctly, turn on the car engine, connect rear view camera and the cigarette lighter by vehicle charger.
Note / remark:
(1)Please installed rear view camera recorder in right place with rich light and enough safety
(2)After correctly installation, LED of system will turn into BLUE color and screen will display now.
(3)Please plug in car charger after the car engine start.
(二)Function
一.Video record
Connecting the car cigarette lighter after the installation completed, turn on the car engine, the recorder will automatically turn on and recording automatic function, press OK key to exit video recording mode, and go into the video standby mode.{if no boot automatic, please long press button (2) to power on}.
Prior to the first video used, You must set up video parameter, and the operation is as follow:
(1)、At video standby mode, short press the key (4) 1 times to enter the the resolution select items, press OK (7) to capture resolution, short press mode button (3) to exit.
(2)、At video standby mode, short press the Menu key (4) 2 times to enter the set video length 1/2/5 minutes, press OK button (7) to select, after finished,press the mode button (3) to exit.
(3)、Turn off car engine, in 6 seconds, recorder and archiving will be saved and closed.
at VIDEO standby mode, short press the menu button (4) 3 times, will enter into the front/back lens switching (front camera / back camera / dual camera mode---PIP),press up/down key (6) and press OK key (7) to confirm.
Note: at VIDEO standby mode, front/back lens switching also can be press shortcut keys, press up key (5) select: front camera A/ back camera B/ dual camera AB. please note, when using back camera, make sure camera have been connected to hole (14)
二.Photograph function
1. at the video standby mode, short press the button (3) into the camera mode, press the OK key(7) once to take a picture, you can setup picture size, short press botton (4) into the resolution 1M/2M/3M,press botton (6) to select picture size, press OK key (7) to confirm.
三. Playback.
1. At video standby mode, short press (3) 2 times into the playback mode, after short press OK key (7) ,you can playback the saved video or photo .
2.Delete file: at the playback mode, select file, press key (4) once and then press OK key (7) to confirm the deletion files.
四.Motion detect function
1.At video standby mode, short press menu key 4 times to enter the settings, press up key (6) select the Motion detect function, and click Open.
2. Motion detect function: at the video standby state; SENSOR will start record when the object moved. during recording, sensor will stop if no objects moved in 10 seconds; if you want to exit, please short press menu button 4 times to enter the setting, then press key (6) select the motion detect function, and select close.
五.IR night vision function
1. When recorder starts, by default, the night vision function was automatically on, inside of the Infrared lamp, these is a photosensitive resistance, it control the recording function base on brightness and darkness of the light. the sensors of infrared lamp will closed when detect brightness of the light, it will enter the night vision mode automatically when detect darkness of the light.
2. Manual night vision function: when the recorder starts, short press bottom (2) to switch to night vision mode during the daytime, night vision mode will detect the surrounding environment was dark and automatically open the dark night lamp, improve the video effectiveness.
六.Voice Broadcast function
1.At Standby mode, press key (4) 4 times into settings, press up key (6) into the voice selection, Factory settings is voice playback with multi-languages support, at standby mode → settings→ voice out/tone, select open / close, press button (7) to confirm.
七.Multiple Languages
This product in multiple languages, Simplified Chinese / traditional Chinese / English / Russian / Japanese / Korean / (voice Broadcast Voice enrolled)
Default language is English
At standby mode, press the menu button (4) 4 times into the language setting and select language.
八.Collision sensor function
After start and during recording, in case of serious vehicle collision, the machine will automatically start collision sensor and the accident of a significant video files saved (this file will not be overwritten and deleted).Settings → G-sensor → 2G/4G/6G/8G (2G is the most sensitive)
九. reverse rear view during back a car.
1.Please make sure the reversing lens have connected to the AVIN/DC, please hide wire inside the car, the back/rear camera must mounted in a fixed position on the rear glass, adjust the right angle. Confirm all installation completed. Start machine and press keys (5) switch to back/rear lens B, adjust the right angle.
2.during the car is back, hanging reverse gear, this machine screen will display the real-time status behind the car, fully help to complete the car reversing
十.update time and date
Before using this machine, date and time must be updated, in order to improve the effect, improve the traffic safety, carry out investigation and obtain evidence. at video standby mode, settings →date. press up / down keys (5/6) to modify date , the next option press bottom (3) continue to be modified, after complete press OK key (7) to save and exit.
十一.Loop video and rewritten video
machine will automatically start the video record when connect the charger or car charger , it support loop recording and rewritten recording, file interval of 200mS-400mS.
十二.External camera
when using external camera, directly connect the camera line 3.5mm, plug into the interface , a white logo will display on machine screen
十三.Removable U disk mode
Machine was shutdown, make sure connect the machine to the computer by USB cable, machine screen will display the selection (USB_disk, PC_camera, REC_Mode).click down/up key and select (disk) , U disk connection mode, then LCD will display the U disk icon.Read file from the removable disk , pull out the USB cable after complete, machine will be power off automatically.
十四.net camera
machine shutdown state, connect the machine to the computer via a USB cable. screen will display the selection you want,the function mode is (USB_disk, PC_camera, REC_Mode).please choice what you need.
Note
(1)please set machine video resolution to VGA before operation.
(2)When you have to read video files by computer, we suggested using "card reader" TF video files are copied to the computer.
(3)Camera are non-drive, without any additional search for driver
十五.Low level power detection
When the machine was detected in low level power, LCD will prompt display the low level battery symbol, machines will be closed after save image in 15 mins(please charge battery ASAP).
KEY Features
1. Power on,off / Fill light switch key features: ① power on / off ②Fill light switch
①Power on / off function: long press power on for 3 seconds, machine will start, at this moment, the working indicator light (blue), LCD screen will display at the video state this moment; REC indicator light (blue) will blinking all this time, video recording is on going; and long press power key for 3 seconds, machine will power off, it will also stop recording and save the video file automatic, work indicator light (blue) and REC (blue) soon went out.
②Fill light switch: start the machine, light touch and short press [Fill light switch] ,will be switch between Fill light switch on / off / mode, when at automatic mode, photosensitive resistance of fill light switch will be control by light brightness and darkness.
2.RESET key
When the machine halts, it will be forced disconnect to the power and restart by prees RESET key in any mode status .
3.up key: ①up scroll ②switch SENSOR to Reverse shot
①Function: in menu state, touch press key (5), to scroll up to browse the video clips;
②switch SENSOR to Reverse shot: In the standby state or video stats, short press the up keys, if want to camera the car inside, just switched to "Reverse shot" function.
4.Menu key function: ①camera menu setting ②video menu setting ③playback menu setting
①Camera menu settings: in camera mode, short touch menu key to enter the photo menu settings, then short touch mode key (3) once ,will exit the photo menu mode,return to the camera mode
②video menu settings: in video mode, short touch menu key into the video menu settings, then a short touch button (3) to exit the video menu mode,return to video mode.
③Playback menu settings: in a playback mode, short touch menu key into the playback menu settings, then a short press button (3) to exit playback menu ,return to playback mode.
5. OK key:①one key photographing ② play/pause
①One key photographing function: start the machine, at video states; short press mode key to switch to camera mode, then a short press OK key (7), to take a picture.then will back to photo standby state.
②play/pause key:at playback mode,short touch key 7 to play video file or pause。